It’s hard to go about our daily routine if dealing with pain and impaired bodily movements. We’re slower, stressed, and less inclined to explore new things because of our limited capacity to move about.

Physiotherapy and osteopathy are effective in alleviating pain and restoring our normal bodily functions hampered by injuries, ailments, and other conditions. In the UK, physiotherapy Medway and osteopathy Medway sessions can be easily booked online. These professionals can assist you in getting back to your daily activities.

Here are 11 good reasons to see a physiotherapist or an osteopath today.

1. If you were injured while playing sports

Physiotherapy Medway is effective in helping people recover from sports injuries like sprains and fractures. It can improve a person’s healing process and assist in helping a person regain his strength to play again.

2. Injuries from accidents

Accidents can also cause injuries. People may suffer from whiplash during a motor incident or a frozen shoulder due to a sudden strong tug on the arm. Physiotherapy Medway can help relieve pain and restore your body movement back to normal.

3. During and after pregnancy

Some women may have difficulty moving and adjusting to the changes in her body after giving birth. Osteopathy Medway can help women during their pregnancy, while physiotherapy can help new mums regain their strength.

4. General well-being

Keeping a regular physiotherapy Medway session can benefit your body in the long run. You gain flexibility through stretching, and your body could be more stable because you can balance yourself more. You can also improve your strength through exercises they will prescribe.

5. Helps with ailments

Physiotherapy is also beneficial for people suffering from ailments. Therapy can alleviate pain for arthritis, while exercise helps stabilize a diabetic person’s blood sugar levels. On the other hand, osteopathy Medway is helpful for people with respiratory problems.

6. Provides relief during ongoing treatments

Our bodies undergo changes and experience pain during medical treatments like chemotherapy. Physiotherapy can help patients deal with the swelling that they experience after undergoing chemo sessions.

7. Care after surgery

Not all people feel normal as soon as they come home from a major surgery. Depending on the post-op rehabilitation you will need, physiotherapy or osteopathy might be beneficial to you.

8. Dealing with weight

If you’re still struggling with weight issues despite trying several diets, you may want to consult with a physiotherapist instead. They can help you develop a weight loss regimen that is unique to your lifestyle and body condition.

9. Old age

Seniors can use physiotherapy to deal better with conditions that occur naturally as they get older, like osteoporosis and arthritis.

10. Vertigo and dizziness

Vertigo attacks can happen anytime and render people unable to function momentarily. Therapy can help with this condition that is related to inner ear issues.

11. It is non-invasive and drug-free

Physiotherapy and osteopathy are both non-invasive remedies that are perfectly safe for patients. It is also a good treatment that doesn’t involve drugs.

Hempstead Therapy Center provides excellent care for people dealing with pain caused by various reasons. Whether it’s due to an injury, an ailment or a condition, we’re here to set you on the path to recovery and wellness. You can visit us at The Hempstead Valley Shopping Centre or call us at 01634 393113. Our website is https://hempsteadtherapycentre.co.uk.

TECHNOSCORE is a leading IT outsourcing firm headquartered in New Delhi, India. The company has now become the go-to development company for global brands, trusted with the mission of fulfilling their corporate goals with pixel-perfect, bespoke solutions, thanks to their industry expertise spanning 15+ years and multiple domains. Their outstanding working tenure has enjoyed working with diverse industries such as Agriculture, Aviation, Finance, Education, Healthcare, Logistics, Media & Entertainment, Transportation, Retail, Real Estate, Hospitality, etc. 

This firm delivers cutting-edge software development services that help various start-ups, brands, and individuals by providing a broad range of services, including mobile app development, web development, eCommerce development, full-stack development, and more. They are the mediator among your software requirements and those changes that help you stay ahead of the competition. Their custom software development services are based on the latest technologies, creativity, and a data-driven approach. They go beyond and beyond to create fruitful long-term relationships with their clients, from using best-in-class resources and staff to careful preparation, release, and assistance.

According to https://www.statista.com/statistics/1124699/worldwide-developer-survey-most-used-frameworks-web/, React, Angular, Express, and Node has become the most used frameworks among developers worldwide. And companies looking for service providers who hold expertise in these frameworks as a whole. TechnoScore gains a competitive advantage by helping clients with the best MEAN/MERN stack development services. Their experts are renowned for working thoroughly with the client requirements and delivering the top-notch mobile or web application backing up with MERN and MEAN stack. Their MEAN stack developers consistently perform experiments with the latest tools and technologies to provide the best-in-class applications that significantly impact the overall performance of the apps and deliver the best results. They exhibit mastery over the most demanded MEAN stack development services. 

At TechnoScore, they make sure that they grow parallelly to the prevalent technological trends in mobile app development. Their expertise lies in MEAN, MERN, Cloud, Blockchain, IoT, CMS, and eCommerce services. 

The unmatched potential of this company in the arena of current stack development services will soon take it on the list of top MERN stack development companies in India. They focus on creating applications that help companies gain a competitive edge and hold a robust image in the mobile applications market. The developer's team at TechnoScore strives to build the finest for start-ups and project management organizations. As per the market, companies prefer full-stack development for better productivity, and MEAN & MERN Stack are the two renowned developments in this class. Companies like these stacks as they make the web development process neater. TechnoScore's team of certified MEAN stack developers helps clients turn their raw ideas into a robust functional application.

The company's Tech experts said: We at TechnoScore, with over 15 years of experience and a keen understanding of the technologies, are committed to offering a series of advanced mobile and web development services that add value to our digital transformation clients globally. To cater to the needs of our clients, we keep our developers updated with technical advancements. With the launch of the MEAN stack, we aim to create highly advanced mobile and web applications that meet the client's requirements and bring more value to their business.

He further added: We are opening the path to success for our clients by remaining at the top of the competitiveness in delivering the finest MEAN/MERN stack development services.

We are mastered in:

• App Development Using the MEAN/MERN Stack - If you need a MEAN/MERN web app solution, their experts can quickly and effortlessly create a secure web application.
• Website Development Using the MEAN/MERN Stack –They build flexible MEAN/MERN stack websites that run smoothly on various platforms to provide a precise solution for your company.
• MEAN/MERN Stack Migration - Migrating software is highly advantageous because it gives the client's app a new look and feel, boosting productivity.
• MEAN/MERN Stack Consulting - They have a seasoned team of MEAN/MERN experts who examine the business needs in-depth and have a solution that is sure to succeed.

Our skillsets are not limited to mobile and web development but also cloud services, Microsoft solutions, digital transformations, tech trends, CMS development, Designing, and more.

Award-Winning Filmmaker Tonja Ayers is making her return to the literary scene by releasing her ninth book, Low Down. The upcoming book features two men, Grant Ashford and Jalen Ross, who live very affluent yet different lifestyles but are on the verge of meeting head-on due to their decision-making and shared relationships. While one man is running for the highest office held in a major city, the other is a party promoter, hanging on by a thread and who unknowingly sacrificed everything to feed his personal desires.

“Low Down is a book loosely inspired by true-life events,” Ayers stated. “Many women are dating and even married to men who unbeknownst to them, are living double lives by participating in down low lifestyles.”

Since the release of her first book, “Stay in Your Place,” Ayers has continued to push the envelope in both film and literature. Low Down will be released June 12th, 2021 at the Hustle & Grind Literary Convention in Detroit, MI. Ayers has been selected as a featured author along with several other notable authors in urban literature like New York Times Best Seller Wahida Clark, Teri Woods, and Shannon Holmes.

“Low Down is different from my previous books because it’s more of a crime story versus a relationship story,” said Ayers.

Like many creatives, Ayers was affected by COVID-19 and had to make certain adjustments for promoting the new book. “COVID-19 has caused me to shift to conducting more business online, but the initial shutdown provided some extra time for me to complete Low Down,” said Ayers.

For more than 20 years, Tonja Ayers has helped others get on their feet—literally and figuratively. Affectionately known as “The Shoe Lady” worldwide, Tonja Ayers has made monumental strides in business, books, and the big screen. A proven industry leader who is widely respected amongst both colleagues and consumers alike, Tonja’s entrepreneurial insight, entertainment acumen, and literary genius are second to none. Featured in several prominent publications across the country, this author, playwright, retail guru, and filmmaker is not only intentional about creating the life of her dreams—but she’s most passionate about helping others do the same.

From selling stilettos to receiving standing ovations in sold-out theatres, Tonja is destined for greatness. She has authored eight books and will release her ninth book project, Low Down, in the summer of 2021. Based on the stories of infidelity her clients shared while trying on shoes, she authored the bestselling book, Stay in Your Place. Even though she wrote the book as a joke, when she mistakenly ordered 500 copies, little did she know that she’d sell out in just a week. Taking the message from the page to the stage, Tonja hosted her debut stage production, Stay in Your Place, before two sold-out audiences. The success of the stage play inspired her to film the movie version of Stay in Your Place, which sold out three movie theaters at its premiere. By February of 2020, Tonja released her second feature film, Chocolate Kiss, which premiered before five sold-out theaters. Her short film, TEN has been nominated and selected for various film festivals.

Tonja was honored with the Spirit of Detroit award in 2019 and was recently nominated for the 2021 Detroit Choice Awards.

For more information about Low Down, please contact Tonja Ayers at 248-973-SHOE or email This email address is being protected from spambots. You need JavaScript enabled to view it.

The Automated 3D printing market was valued at USD 507.8 million in 2020 and is expected to grow at a CAGR estimated around 37.14% over the forecast period (2021 - 2026).

- Over the last few years, 3D printing has constantly experienced a shift from the prototyping and small batches phase to mass production technology with growing adopting rate across the industries, both the industrial and non-printer vendors have shifted their focus automation
- For instance, In March 2019, 3DQue announced its expansion to the automated 3D printing market by unveiling automation upgrades to its existing extrusion 3D printing systems called Qsuite. The solution comprises both hardware and software technology that automates the end-to-end process of 3D printing such as part removal, job scheduling, bed reset, print restart. Additionally, operators would be now able to access real-time data remotely.

- Also, with the evolutionary trend for additive manufacturing hardware growing beyond stand-alone systems that are used for prototyping, tooling, and single-part production to been used as core systems within integrated digital mass production line is driving the number of opportunities in the emerging lights out factories.

- owing to this factory managers are incorporating more and more automation into their additive manufacturing production line centered with post-processing as it covers two-third of the cost of 3D printed parts that can be associated with removal support material while improving the surface finish.

- For instance, post-processing equipment from companies including AMT, PostProcess Technologies, DyeMansion is helping AM users to automate support removal, coloring, and cleaning for the polymer-based 3D printed parts. particularly AMT is seen recently working to overcome the depowdering challenge for power-based technologies such as SLS.

- One of the most common drivers for the integrating automation in the product line is to reduce the labor cost added with inconsistencies, errors associated with human intervention and assurance of an increase in quality which is considered to be critical in high-value productions such as 3D prints drives the growth of the market. For instance, In March 2020 Oceanz 3D and AM-FLOW announced a partnership to develop fully automated 3D printing solutions with special emphasis to optimize post-production process in terms of quality and speed

- Furthermore, According to HP Inc as automating processes such as automated assembly arrives, it will drive industries to seamlessly integrate multipart assemblies including the combination of both 3D printed plastic and metal parts that is not feasible with even current super printer owing to the processing temperature. This instance would benefit the auto industry by allowing the manufactures to perform tasks such as printing metals into plastic parts, build conductors among others.

Key Market Trends

For sample report please visit: https://www.statzyreports.com/report/sr496786/automated-3d-printing-market

Use of Robots in Automated 3D Printing is expected to drive the Growth of the Market

- Over the years, researchers around the world have been working towards developing solutions and methods that would cater to the demand for automation in 3D printing, one such approach was the combination of robotics technology with 3D printing to automate the tasks although it initially did not gain much momentum owing to its complexity, however, with vendors integrating simulation software with their robotic 3D printing technology is driving the growth of the market
- Also, with 3D printing gaining momentum industries such as Oil & Gas, Medical in addition to Automotive and Aerospace that rely on composite materials to make strong yet light material structures is constrained by labor-intensive process and geometric limitations which can be countered leveraging robotic technologies. for instance, Stratasys' robotic composite 3D demonstrator which is powered by Siemens software delivers composite 3D printing using its 8-axis motion system.
- Additionally, Freeform manufacturing with a multi-axis robotic arm could be deployed in an environment where 3D printer requires to move in various directions, angles thereby expanding the freedom of creating complex figures added with the ability of the robotic arm to better manage the raw materials drives its growth in manufacturing industries.
- For instance, industries such as metal casting industry would be to benefit from robotics systems like Robotic Additive Manufacturing developed by Virids3D in collaboration with EnvisionTEC that leverages binder jetting technology and works with sand, the system uses ABB' industrial robotic arm with inkjet head to deposit layers of liquid and sand onto the printing platform
- Furthermore, It is anticipated that the construction industry could be one of the biggest beneficiaries of robotic 3D printing. few of the construction firms have already adopted industrial robotic arms to 3D print with a range of materials. for instance, XtreeE, a start-up based in France equipped the ABB' industrial arm with its concrete extrude that is able to create complex geometric structures, the company has achieved many partnerships with architecture and civil engineering companies and aims to explore sustainable design and construction.

North America Holds Major Market Share

- The North America region is one of the lead innovators and pioneers, in terms of adoption of 3D printing, Robotics, AI among others is expected to hold a prominent share in the Automated 3D printing market. Amongst the 3D printing inventions coming from all corners of the world, many of the inventors of the patents and applications reside in the United States
- According to the National Conference of State Legislatures, the US economy is expected to USD 600 to USD 900 billion if they are able to capitalize on the growing 3D printing market upon with further operational efficiencies with automation will drive the growth of the market
- Additionally, growing government support is also attracting many investors to invest in R&D programs. for instance, the United States has funded 3D printing R&D in academia via America Makes and promoted initiative through SBIR
- Furthermore, The study states that US imports about USD 3 Trillion goods annuals with USD 1.4 trillion imports are made up of leading Industries that likely are impacted with the automation of 3D printing that is Industrial, Automotive, Healthcare and Aerospace.
- Additionally, unlike other countries the US despite having tax incentive such as section 199 for manufacturing credit, there's no particular tax incentive at the federal level that targets 3D printing vendors, this instance encourages foreign automated 3D printing vendors to enter the region

- As with recent outbreak of global pandemic COVID-19 that caused nation-wide lockdowns across the world as the markets aim to achieve automation in 3D printing given region' adoption of 3D bioprinting that manufactures medical equipment, surgical devices according to US FDA further leverages the growth of market.

Competitive Landscape

The Automated 3D printing market is highly competitive and consists of several major players who are trying to gain a larger share but top players have gained a major proportion of consumers and also investing in R&D, Partnerships with Hardware vendors for more developments and innovations. Some of the key players include Stratasys Ltd.,3D Systems Corporation, The ExOne Company, among others.

- March 2020 - ABB announced the introduction of 3D printing capabilities of its PowerPac Software to its RoboticStudio stimulation. This allows users to program the ABB robots for 3D printing, unlike traditional 3D printing methods that required users to program the printing paths by plotting points and trajectories. The solution is said to support a variety of processes such as printing with granules, welding, mix printing among others.

- March 2020 - PostProcess Technologies Inc., the provider of automated and intelligent post-printing solutions for industrial 3D printing, announced a channel partnership with the 3D printer distributor Z-Axis, based in Russia, Z-axis which will broaden the company's’ reach throughout Russia, Belarus, Kazakhstan, Kirgizia, and Armenia.

Reasons to Purchase this report:

- The market estimate (ME) sheet in Excel format
- 3 months of analyst support

For sample report please visit: https://www.statzyreports.com/report/sr496786/automated-3d-printing-market

Contact Us:
Poojan Dogra
Public Relations Manager
Statzy Market Research
Email : This email address is being protected from spambots. You need JavaScript enabled to view it.
Email : This email address is being protected from spambots. You need JavaScript enabled to view it.
(IN) - +918484035727
(US) - +1415-871-0483
Website : www.statzyreports.com